We hold strengthening and perfecting our items and repair. At the same time, we get the job done actively to do research and progress for Factory Cheap Hot CJ20-630D EN50181 11kV 12kV 15kV 24kV 25kV 630A  Unscreened Separable Tee Connector with Mechanical Lug Single Core Copper Tape Aluminum Wire Armour (Front Tee), Our organization quickly grew in size and status because of its absolute dedication to top quality manufacturing, higher value of merchandise and excellent customer assistance.
We hold strengthening and perfecting our items and repair. At the same time, we get the job done actively to do research and progress forChina Cable Termination and Outside Cone, Now we’ve been sincerely consider to grant brand agent in different areas and our agents’ maximum margin of profit is the most important thing we care about. Welcome all of the friends and customers to join us. We have been ready to share win-win corporation.
1. Product overview

Product name：Torque Terminals（BLMT series）

Model representation method

BLMT-□□/□□-□□

BLMT-diameter of mounting recess/suitable conductor range-product model

2. Application

Torsion terminals are connectors used for connecting wires to equipment, mainly used for connecting insulated wires, aluminum wires, aluminum alloy wires, steel-core aluminum wires and copper wires at non-bearing positions.

3.Scope of application

 Applicable leading line：25-240㎜².

4.Technical parameters

①The body of the product is made of high strength tin-plated aluminum alloy

②The inner surface of the wire hole has a threaded groove design

③Torque bolts adopt double shear head design to ensure that the bolt can not be removed after cutting head, the bottom of the bolt has a contact ring, better guarantee the electrical properties of the product.

④With a special pad, take it out or put it in, and adjust the product’s range of applicable wires, three products will ensure that all wires from 25㎜²-240㎜² are applicable

5. Installation steps

①Check the type and diameter of the wire and select the appropriate type of torque terminal to determine whether the pad wire is used.

②.To measure the length of the end conductor inner hole, to determine the length of wire peel (length of the conductor inner hole L-wire peel length L2≤2 mm).

③Insert the wire into the terminal and install the mechanical bolt.

④Apply force with socket wrench until torque bolt head is cut.

⑤Use suitable bolts to secure the Mechanical cable lugs to the equipment.

6.Features and Advantages

▪ Wide range of applications

▪ Compact design

▪ Can be used with almost any type of conductor and material

▪ Constant torque shear head nuts ensure good electrical contact performance

▪ Easy installation using standard socket wrenches

▪ Pre-engineered for perfect installation on medium voltage cables up to 42kV

▪ Good overcurrent and short-time current shock resistance

The lugbody is made of a high tension tinned aluminum alloy. Terminals are suitable for outdoor and indoor applications and are available in different palm aperture sizes.

Mechanical bolt type1

Made of special aluminum alloy, these contact bolts are hexagon head double shear head bolts. The bolts are treated with a high quality lubricant and are equipped with a special contact ring. These contact bolts cannot be removed once the bolt head is cut.

Mechanical bolt type2

The screw tooth of torsion bolt is designed with foursections, so that the fracture of installation tightening wirewill sink into the surface of the connecting pipe，Bolt with inner hexagon design,Remove the bolt during maintenance,The body can be used over and over again,Reduce construction cost

Accessories

Special accessories, in or out can adjust the applicable conductor range. These plug-ins have longitudinal stripes and a positioning slot.

The installation

▪ Does not need special tools to install, only a socket wrench can be installed;

▪ The same reduction length for each type, including the provision of inserts;

▪ Design of graded torque scissors head nuts to ensure reliable and firm contact;

▪ Each joint or cable lug has its own installation instruction;

▪ We recommend using a support tool (see attachment) to prevent conductor bending.

▪Hexagonal socket with correct A/F dimensions

▪Ratchet wrench  Or electric impact wrench

▪It is strongly recommended to use a clamp to provide support for shearing bolts during shearing and to prevent conductor bending

We hold strengthening and perfecting our items and repair. At the same time, we get the job done actively to do research and progress for Factory Cheap Hot CJ20-630D EN50181 11kV 12kV 15kV 24kV 25kV 630A  Unscreened Separable Tee Connector with Mechanical Lug Single Core Copper Tape Aluminum Wire Armour (Front Tee), Our organization quickly grew in size and status because of its absolute dedication to top quality manufacturing, higher value of merchandise and excellent customer assistance.
Factory Cheap HotChina Cable Termination and Outside Cone, Now we’ve been sincerely consider to grant brand agent in different areas and our agents’ maximum margin of profit is the most important thing we care about. Welcome all of the friends and customers to join us. We have been ready to share win-win corporation.